Quality Tubular Centrifuge Manufacturer | zonelink
Tubular centrifuge has the advantages of high separation coefficient, large capacity, small footprint, easy operation, etc., in the pharmaceutical, health food, beverage, chemical industry to separate liquid-solid or liquid-solid materials. It is an ideal centrifuge, utilizing the centrifugal method, with a minimum particle size of 1 um, suitable for distillation, condensing and clarifying materials, small gravity differences, small and few solid particles and high erosion products.
Tubular Centrifuge Manufacturer
This tubular centrifuge separator is used to separate a variety of difficult-to-separate liquids, especially suitable for liquid-liquid separation, liquid-solid separation, liquid-solid separation.
It is widely used in pharmaceutical, health food, beverage and chemical industries. Such as transformer oil, edible oil, turbine oil, lubricating oil, vegetable oil, fuel, grease, saponification, various powders and syrups.
It can also be used to separate the plasma of biological ear bacteria and extract plasma from animal blood; Refined soaked placenta, polyphenol tea, and concentrated soy phospholipids; Purified angstrom horn; Separation of oil and treatment of sewage, various drugs, etc
Working principle
Tubular centrifuge is a kind of fine separation equipment.
Suitable for the separation of solids with low solid content and incompatible liquids with small specific gravity difference.
It is a necessary equipment for pharmaceutical, food, chemical, biological products, beverage products and other industries.
The principle is that according to the different centrifugal force, the force of different gravity materials is different, so as to achieve the purpose of separation.
Tubular centrifuges are divided into two types, clarified (GQ) and separated (GF).
The main function of the clarifier centrifuge is to separate the liquid phase from the solid phase.
The main function of the split tubular centrifuge is to separate the liquid (light liquid) from the liquid (heavy liquid) and a small amount of solid phase.
Technical parameter
Detail
Drum-tubular centrifuge
The drum is made of 304/316L material, stable after solid solution. The drum head and bottom shaft cover are forged with high structural strength and stable use.
Liquid collect pan parts- tubular centrifuge.
The liquid tray is the main component that holds the clarified liquid, especially the treatment surface of the internal joint. Proper treatment has a direct effect on the hygiene of the clarified liquid. The liquid disc cylinder of our company adopts the integral structure, the inner surface has no joint, the outlet is bent once, and there is only one weld. The weld adopts the forming process of single side welding and both sides welding, so there is no dead Angle. Easy to clean, no residue after cleaning.
Light/Heave liquid collect pan parts-tubular centrifuge
The liquid pan cover forms a closed chamber with the liquid pan to collect the clarified liquid, so the function of the liquid pan cover and the manufacturing process are also important, affecting the clean state of the material. The original process of liquid pan cover is welded, that is, after the standard head is welded with the steel ring, it is then turned and polished. After welding, one is deformation, affecting the appearance; Second, the internal interface can not be processed, even if the welding and polishing, the gap on the back can not be completely processed. Our company adopts advanced technology, the liquid pan cover is formed as a whole, beautiful appearance, the internal shape is no dead corner arc transition, easy to clean without residue, in line with GMP standards.
Three blade - tubular centrifuge
The blade is the main part of the drum, mostly using the process of riveting or spot welding. This method is relatively simple and easy to operate, but there are gaps in the cross section of the plate, which will cause unclean cleaning and bacterial contamination in long-term use, which is a fatal flaw for pharmaceutical companies. Integral welding will cause the plate to be undulating (the blade rotates in sync with the drum), which will shorten the service life. Moreover, because the straightness of the plate is reduced, the dynamic balance will be inaccurate, and the vibration and deviation of the machine will increase. Our company adopts cold welding technology, small welding current, narrow thermal sensitive area, small thermal deformation, no gap, no dead Angle after welding, no residue after cleaning.
Inlet bearing housing-tubular centrifuge
The use of integral structure, increased external size, higher strength, more outlet and liquid capacity space, smooth liquid flow. The pipes are hygienic polished parts, in accordance with GMP standards.
Sliding bearing housing-tubular centrifug
The traditional spring uses pressure, and the lower part of the damping is automatic to the sliding bearing, but due to the nature of the tower spring, the role of the radial force is very small, especially for large diameter rollers, when the cloth is not equal, or operating in the resonant frequency range, it is difficult to overcome the deflection and vibration of the roller, the production of sliding bearings adopts advanced design and technology, not only the installation of pressure springs, The radial is also equipped with several small springs, through a reasonable layout, to limit the freedom of the drum on the radial, so that the machine runs more smoothly.
Body - tubular centrifuge
The whole stainless steel body of the tubular separator manufactured by our factory is welded with 304 medium and thick plate parts. After aging and polishing treatment, the product has high stability and beautiful appearance, and the appearance of the cast iron body (or carbon steel body) is different from the stainless steel plate used by other manufacturers, and the service life is longer.
Application
Lubricating oil separation Motor oil separation Coconut oil separation
Packaging
Customer feedback
Certifications and Patents
