Faifan Centrifuge DHN360
Gabatarwa
Mai raba faifai na DHN360 kayan aiki ne na raba daidaici mai sauri, an sanye shi da katakon diski mai siffar mazugi, ruwan da ba shi da ƙazanta a cikin ƙaramin kwararar rata ta faifai a babban gudu, don cimma kwararar laminar, don haka kayan nauyi guda biyu daban-daban (ruwa-mai ƙarfi) don cimma kyakkyawan tasirin rabuwa.
Sigogi na fasaha da daidaitawa
| MODEL | DHN360 |
| Girman ganga | 360mm |
| Iyawar ciyarwa | 1000-2000L/h (bisa ga ainihin sigogin kayan da ke wurin) |
| Saurin juyawa na kwano | 7020rpm |
| Ma'aunin rabawa | 10000 |
| Ƙarfin mota | 7.5kw |
| Ƙarar ganga: | 20L |
| Yankin zama daidai | 18.5x107cm2 |
| Hanyar slagging | Lalacewar atomatik ko tazara |
| Girgizar na'ura a cikin aikin masana'anta | ba fiye da 1.2mm / s ba |
| Tsarin farawa | mai canza mita |
| Tsarin tsaftacewa | Na atomatik |
| Matsakaicin kwararar ruwa | 5000L/h |
| Hayaniya | ≤80db |
| Nauyin mai rabawa | 1800kg |
| Girman | 1495mmX1130mmX1485mm |
Kayan aiki kayan aiki
1. Jikin ganga, murfin ganga da piston an yi su ne da ƙarfe mai ƙarfi, kuma zoben kullewa an yi shi ne da ƙarfe mai ƙarfi na chrome-nickel.
2. Faifan diski, shigo da kaya da fitarwa da murfin da ya yi daidai da sassan hulɗar kayan an yi su ne da kayan 304.
3. An yi firam ɗin da ƙarfe mai ƙarfi, kuma an yi wa saman fuselage fenti mai zafi sosai.
4. Rufin silicone ne ke hulɗa da ɓangaren kayan da ke cikin zoben rufewa.
Aikace-aikace
1. Abin Sha: Giya, shayi, kofi da giya.
2. Ruwan 'ya'yan itace: Ruwan 'ya'yan itace, nau'ikan ruwan 'ya'yan itace daban-daban
3. Man kayan lambu: Man kwakwa, man colza, man iri na auduga, man core, man dabino, man waken soya, man gyada, man shinkafa, man sesame, man safflower
4. Man dabbobi: Man kifi da sauran man dabbobi.
5. Man ma'adinai: Man fetur, man dizal, man shafawa, man transformer da man sharar gida.
6. Madarar Madara: Madarar da ke rage mai
7. Ruwan da aka yi da fermented: Yawan ƙwayoyin cuta ko fungi bayan fermentation
Ikon wutar lantarki
1. Ana sarrafa mai rabawa ta hanyar shirin PLC, tare da allon taɓawa, kuma an sanye shi da tsarin ƙararrawa mai aminci (wato, zai yi ƙararrawa idan sigogin aiki sun wuce kewayon bayanan tsaro na kayan aiki).
2. Tsarin yana da bawuloli uku na ruwa masu aiki, ta hanyar bawul ɗin solenoid mai dacewa don rufewa, fitar da slag da aikin fitar da ruwa.
4. Kayan aikin suna da na'urar firikwensin girgiza, idan girgizar kayan aikin ta fi ƙimar saitin farko girma, tsarin zai aika ƙararrawa, idan girgizar ta fi ƙimar saitin na biyu girma, tsarin zai tsaya ta atomatik.
5. Tsarin yana da na'urar watsa wutar lantarki a cikin da'irar motar don gano kwararar wutar lantarki a ainihin lokacin. Idan kwararar wutar lantarki ta fi ƙarfin wutar lantarki na motar girma kuma ta ɗauki tsawon mintuna 2, tsarin zai aika da ƙararrawa.
6. Kayan aikin suna da ƙararrawa ta fitar da slag, idan adadin fitar slag bai kai ga buƙatun da aka saita ba, injin zai yi ƙararrawa ta atomatik.
7. Kabad ɗin sarrafa wutar lantarki (Jouneng), injin (Wannan), PLC (Siemens -S7-200 SMART), allon taɓawa (Schneider, inci 7), sauran kayan lantarki masu ƙarancin ƙarfin lantarki ta amfani da alamar Schneider.
Tsarin samar da kayayyaki
1. Babban injin guda ɗaya, gami da injin da ganga.
2. Babban kabad na sarrafa wutar lantarki guda ɗaya
3. Saitin kayan gyara da kayan sawa (littafin jagorar mai amfani don ƙarin bayani)
4. Saitin kayan aiki na musamman (littafin jagorar mai amfani don cikakkun bayanai)
5. Na'urorin haɗi: saitin ruwan aiki (gami da fitar da slag, rufewa, bawul ɗin solenoid mai wankewa da ma'aunin matsin ruwa), saitin kayan haɗin bututun shigo da kaya da fitarwa (gami da bututun shigo da kaya da fitarwa, bututun ƙarfe da ma'aunin matsin lamba na bututu).
Bukatun fasaha
1. Tsarin wutar lantarki mai matakai uku 380V, 50HZ, tsarin waya biyar mai matakai uku.
2. Bukatun ruwa na aiki:
(1) Ruwan da aka tausasa, abun da ke cikin tauri ƙasa da 0.001% (V/V), matsakaicin diamita na barbashi: 50um.
(2) Matsi 0.3-0.4mpa.
(3) Yawan sinadarin chloride ƙasa da 100ppm
(4) Taurin ruwa bai kai 180mgCaCo3/L ba.
Tallafin kayan aiki da sabis bayan tallace-tallace
(1) Lokacin garantin samfurin zai kasance watanni 12 daga ranar da aka karɓi kayan aikin ƙarshe, kuma za a gudanar da karɓar kayan cikin wata guda bayan kayan aikin sun isa wurin abokin ciniki;
(2) Horarwa: A cikin tsarin ƙira, ƙera, shigarwa, gyara kurakurai da kuma sabis na bayan-tallace-tallace, za a horar da ma'aikatan fasaha na Party A da masu aiki a wurin har sai sun ƙware, ta yadda ma'aikatan Party A za su iya amfani da kayan aiki da kansu kuma a al'adance bayan ma'aikatan Party B sun tafi.
(3) A lokacin garanti, idan akwai wata matsala ta ingancin kayan aiki, Part B zai amsa cikin awanni 24 kuma ya isa cikin awanni 48 don magance matsalar, kuma Part B zai ɗauki dukkan kuɗaɗen. Idan aka samu matsala sakamakon amfani da Part A ba daidai ba, Part B zai caji kuɗin da ya dace.
(4) Bangaren B zai samar da ayyukan bin diddigin inganci ba tare da ka'ida ba bayan kammala shigarwa da gyara kurakurai.
(5) Bayan lokacin garanti, za mu ci gaba da bayar da tallafin fasaha kyauta ta waya, kuma za mu caji kuɗin da suka dace don hidimar wurin bisa ga ainihin yanayin.
Zane
