Kutheni ii-centrifuge zifakwe i-Halar? | Umenzi we-Centrifuge ZONELINK

Kutheni ii-centrifuge zifakwe i-HALAR?

1. Ukumelana nobushushu obuphezulu (ubushushu obuphezulu bokusebenza yi-150℃);

2. Ukumelana okunamandla kwe-asidi kunye ne-alkali (ixabiso le-PH phakathi kwe-1 ~ 14)

3. Ukunamathela okugqwesileyo (uxinzelelo olubi lunokufikelela kwi-0.09Mpa, isiphumo se-vacuum)

4. Ubomi benkonzo ende (iminyaka esi-8 ukuya kweli-10 phantsi kweemeko eziqhelekileyo, ixesha lewaranti lihlala linikezelwa kunyaka omnye)

5. Ukumelana okunamandla kokungena (i-hydrofluoric acid, igesi yekhlorini, i-bromofluoric acid kunye nezinye iigesi zinokumelana okuhle kokungena)

Uphawu oluphambili:

Izinto ezahlulwe yi-centrifuge zonke ziyabola ukuya kuthi ga kwinqanaba elithile, kwaye izinto ezidibana nezinto kufuneka zihlangabezane neemfuno zokuxhathisa ukubola ukuqinisekisa ukusetyenziswa ngokukhuselekileyo.

Iintlobo zezinto zokwakha: 304, 321, 316L, 904L, ipleyiti yetitanium, intsimbi engagqwaliyo ye-duplex, njl.

Amanyathelo onyango lokulwa nokugqwala komphezulu: i-PE lining, i-raber lining, i-spraying HALAT, njl.

Abathengi kufuneka bazise umenzi ngeempawu zomzimba nezekhemikhali (iimpawu zeekhemikhali, ubushushu ngexesha lokuhlukana, njl.njl.) ngezixhobo kunye nezinto zokuhlamba nezokucoca, ukuze umenzi akwazi ukuphakamisa ukhetho lwezixhobo ze-centrifuge ngokweempawu zesixhobo esahlulweyo, kwaye Amisele iiringi zokuvala ezifanelekileyo, ii-gaskets kunye namalaphu okucoca ukuqinisekisa iimfuno zokulwa nokugqwala kwe-centrifuge.

Kutheni kubalulekile ukuba umphezulu womphezulu wezinto zokugquma ube lukhuni?

Ngenxa yokuba ubulukhuni bomphezulu obuphezulu bubonelela:

Ukumelana nokuguguleka okungcono (njengokuhlaliswa rhoqo kunye nokungqubana kwamasuntswana aqinileyo okanye iityuwa ezisetyenziswayo)

Ukumelana ngcono nokukrwela (umz. thintela umonakalo ngexesha lokufakwa)

Oku kwenza i-ECTFE ibe yeyona nto ikhuselekileyo. Ngexesha lokufakwa nokuthuthwa, amathuba okonakala ngengozi kweringi ayancitshiswa kwaye iindleko zokulungisa ziyancitshiswa.

Kutheni kubalulekile ukuba ipeyinti ibe bushelelezi?

Umphezulu we-Halar ECTFE, nokuba ukhutshiwe, uxonxiwe okanye ugqunywe ngomgubo, uthambile kakhulu, njengoko kungqinwa yi-scanning electron microscopy okanye i-electron force electron microscopy.

Inzuzo yokuba nomphezulu ogudileyo

Inciphisa amathuba okuba kubekho imingxunya eqhotsiweyo

Ithintela ukuqokelelana kwamasuntswana aqinileyo kunye neetyuwa zesinyithi kwaye ithintela ukuvaleka, ingcono kakhulu kunemibhobho yePP, PVC okanye yeFRP

Ukuncipha kwe-biofilm kunye nokwakheka kwebhaktheriya, kuboniswe nakwiziphumo ze-biofilm xa kuthelekiswa nentsimbi engagqwaliyo epholishiweyo kunye nezinye iifluoropolymers.

FAQ

Iingenelo