Structure and principle of horizontal spiral centrifuge:
The horizontal spiral centrifuge is a spiral unloading agent. The horizontal spiral centrifuge is mainly composed of a spiral conveyor and differential component with the same rotation drums, the same drum turning to the drum to the rotation, and a slightly lower rotary rotation shaft. When the suspension of the horizontal spiral centrifuge is to be separated, the suspension liquid is sent to the tube by the hollow rotation shaft, and the suspension is immediately thrown into the turning drum cavity of the centrifugal machine under the centrifugal force of a centrifugal drum to rotate at a high -speed rotation. Inside. The high -speed rotation drum of a horizontal spiral centrifuge produced a strong centrifugal force to throw a solid -phase particles with a liquid phase density on the inner wall of the drum to form a solid layer (because the ring, called the solid ring layer) water due to density Small and small centrifugal force, so it can only form a liquid layer on the inside of the solid ring layer, called the liquid ring layer. Due to the different speed of the spiral and drums of the horizontal spiral centrifuge, there is a relative movement (that is, the speed difference), and the horizontal spiral centrifuge uses the relative motion of the spiral and the drum to slowly promote the sludge layer of the solid ring layer. By the end of the turning drum, and after passing through the dry area, the liquid of the liquid ring layer of the liquid ring layer distributed by the rotary circle is continuously discharged from the weir port continuous \ overflow to the drum to form a separation liquid.