1. The machine adopts photoelectric tracking, and color cover film or light film can be used for packaging.
2. The machine can use combined molds, which are easy to replace and can be used for multiple purposes. The mold has a cooling system.
3. The machine is equipped with a first-class German Leybold vacuum machine. The quality is more stable and reliable.
4. The machine equiped with a corner waste winding and recycling system (more energy-saving and noise-free than waste film recycling barrel recycling) to maintain environmental hygiene.
5. The machine adopts advanced cross-cutting and longitudinal cutting system.
Application
The R320 packaging machine can be packaged with PVC materials. The forming mold and heat sealing mold can be reasonably designed according to the external dimensions of the product to achieve the best packaging effect.
First, the machine's conveyor chain drives the PVC material through the forming mold to press out the pre-designed shape. Then more than two staff will perform the feeding in the feeding area. The product then enter the heat sealing mold for vacuum sealing.
High-precision sealing device can ensure stable and reliable sealing performance of packaging. Then enter the cutting area and process the corners of the package. Finally, the processed packaging products are output.
If there are some special properties for products. After adding materials, a foam pad can be placed behind the product to cover the sharp corners of the product. It can reduce the damage of the product to the packaging bag, improve packaging quality, and achieve packaging durability.
Mold | ZL-R320 |
Upper film width/lower film width | 298mm/322mm |
Studio molding temperature/heat sealing temperature | 70-130℃/125-150℃ |
Studio molding pressure/heat sealing pressure | 0.15Mpa/0.15-0.3Mpa |
Studio molding time | 1-3S |
Studio heat sealing time | 1-5S |
Towing times | 2-6 times/min |
Supply voltage/total power | 380V/50HZ/maximum power 12KW |
Studio cooling water quality requirements | The chloride ion content in cooling water should not be higher than 25mg/L |
Compressed air pressure | ≥0.6 MPa |
Cooling water pressure | ≥0.1 MPa |
Dimension | 3300*920*1650 mm |
Weight | About 1000kg |
Air compressor | 1.0m³/min, pressure is 10kg |
Gas tank | 1.0m³, pressure is 10kg |
Cooling water pressure | 0.05Mpa |
Main control power supply requirements | 380V/50HZ/30KW |
The main components of the equipment are all made of 6061 high-strength aluminum, and stainless steel is perfectly combined with the high-strength body.
High-quality copper alloy and high-strength engineering plastic
