Milk Cream Separator
Press tightly the cream nozzle, the funnel nozzle and funnel in turn, finally put the milk pot container and metal rod on (pic5). The milk container switch(Metal Rod) must be closed before using. Clockwise rotation is closed/Anticlockwise rotation is open.
Product installation
The Installation steps are as follows:
① Prepare all parts of the milk cream separator (PIC1).
② Align the hole at the bottom of the container with the electric separator. The "Dong" sound when the rotary installation is tightened indicates that it has been fully installed (PIC2)
③ Press tightly and attach the skimmed milk mouth and the cream mouth to the container below. The cream mouth can be turned at will (PIC3)
PIC5
① After the separation of cleaning butterfat, let the motor work for 1 minute. Finally, turn off the power and disconnect the power cord.
② Press tightly the cream nozzle, the funnel nozzle and funnel in turn, finally put the milk pot container and metal rod on (pic5). The milk container switch(Metal Rod) must be closed before using. Clockwise rotation is closed/Anticlockwise rotation is open.
Step 1 Turn on the switch of the motor, and the milk pot continues to be closed
Step 2 After works for half a minute, turn on the milk pot switch to separate the cream
During the installation of this step, the three convex points are facing downward (PIC4).
