How to debug tube filling machine?/Zhonglian

Tube filling machine is a high technical equipment with successfully and designed by introducing into advanced overseas technology and integrating GMP requirement,with features of fair structure,full function, easy operation,accurate filling,stable running,as well as low noise.It adopts with PLC controller.automatically operating from liquid or high viscosity material filling till batch number printing (include manufacture date),it’s an ideal equipment for Alu tube,plastic tube and multiple tube filling and sealing in cosmetic,pharmacy.foods,adhesives etc,comply with the standard of GMP.

Tube filling machine Main features:

1)Tube filling machine stepless speed regulating, parameters of the grasping device equipment, production count statistics, pressure indicator, fault indication, health, making operation simple and user-friendly.

2)Tube filling machine Automatic completion of feeding tube, color sensor,  filling, sealing, marking, export of finished products the whole process.

3)Tube filling machine High precision calibration system, reduces the chromatic aberration of tube and color range.

4) Tube filling machine  Digital display, adjust fast, accurate (for multiple specifications and multiple variety production)。

5)Tube filling machine Integration of mechanical, optical, electrical, gas,if the tube not at his right position and low atmospheric pressure, automatic display ,the machine will alarm, when open the protective door，the machine can shut down automatically.

Tube filling machine difference between our machine and the machine of other manufacture

1．Tube filling machine Besides of the motor of feeding tube，we add a rail bearing to move to make sure the tube can drop smoothly.

2 Tube filling machine We use the cylinder to press the tube to the right position ,To avoid the material waste caused by tube does not reach the designated position.

3．Tube filling machine There is enough time for eye marking,the pulse make the eye marking stable.

4．Tube filling machineAbout the tube-holding base we use a mechanical interlocking to avoid the tube-holding base slipping in a high speed rotation 。Other manufacture use magnetic 。

5  Tube filling machine The sealing place use "LESITER" ( Switzerland) hot air system to heating the tube, and the sealing is beautiful.

6：Tube filling machinethe filling piston parts we use ceramic istead of stainless steel. The stainless steel need to clean and replace very ofen. Our ceramic piston can be used forever. It saves a lot time. Other manufacture use the stainless steel.

7: Tube filling machineFor the plastic tube,we added a function to trim the tail to make sure the tail to be neat and beautiful.

8: Tube filling machineAll of our electrical parts use OMRON, DELTA, MITSUBISHI and so on,and the cylinder make to order.

9:Tube filling machine we use sheave drive，not cam .

10:Tube filling machinewhen the the color sensor does not detect the target, or the mark is not in the right direction,the filling part does not fill this tube to avoid the wasting of the material.

11：Automatic tube filling and sealing machine . Valid and robust high speed tube filling machine. 12 station Cup-holder rotary table plate. Diving nozzle for a correct filling up from the tube bottom. CLOCKWISE rotation. Ergonomic tube loader.  Quick format change over. Stable speed 65-75 tubes/ min.

Detail drawing of tube filling machine

Tube loader of tube filling machine               Eye-marking and cleaning of tube filling machine    Heating the tubeof tube filling machine

Sealing and batch number  of tube filling machine       Trim the  tail  of tube filling machine       Sheave drive  of tube filling machine