DECANTER CENTRIFUGE

VR
1
1
Separation performance
Separation performance is one of the most basic functions, including separation effect, washing effect, processing capacity, degree of automation, etc. At the beginning of ordering, due to the difference in material properties, including the viscosity, particle size, density, solid-liquid ratio of the slurry and other factors, it is difficult to determine the final separation effect. Generally, the separation factor of the centrifuge is used to measure the centrifuge. The separation effect of the machine.
1
1
Explosion-proof performance
If the material (or environment) processed by the centrifuge contains flammable and explosive substances such as organic solvents, the centrifuge should have explosion-proof performance. The explosion-proof performance depends on the explosion-proof requirements (grade) of the process. In the explosion-proof occasions involved in the past, it was only proposed to configure explosion-proof motors. In the past two years, most of the occasions where the materials to be processed contain organic solvents such as solvents have proposed nitrogen protection requirements.
1
1

In fact, in order to achieve real explosion-proof centrifuges, various measures must be taken in terms of machinery, electronic control, and accessory configuration, such as: electronic control system: explosion-proof isolation grid, non-contact energy-consumption braking system, static electricity, etc. Grounding, explosion-proof automatic control.


Mechanical system
explosion-proof motor, explosion-proof lighting, anti-collision measures, anti-static transmission belt.
1
1
Explosion-proof accessories
nitrogen protection device, nitrogen online detection, on-site explosion-proof control button.
1
1
Therefore
for occasions with explosion-proof requirements, users should specify the separated medium, explosion-proof requirements and grades when ordering, configure corresponding devices and take appropriate measures to meet explosion-proof requirements.


    • Decanter Centrifuge

       Applied to the separation of mixed liquid with a solid phase particle size greater than 0.005mm and a concentration range of 2-40%. The equipment is divided into two separations of liquid and liquid, and three separations of liquid, liquid and solid. The equipment is mainly used in chemical industry, food, medicine, environmental protection and so on.

      Decanter centrifuge is a machine that uses centrifugal force to separate liquid-solid or liquid-liquid mixtures.Through the high-speed centrifugal force come into the high-speed rotating drum, the liquid in the solid-liquid mixture is thrown out of the rotating drum at high speed, and the solid remains in the rotating drum to achieve the effect of solid-liquid separation.


      The decanter centrifuge is mainly used to separate the solid grain from the liquid in the mixture; Or to separate two liquids of different densities from each other in the incompatible (for example, to separate cream from milk); It can also be used to remove liquids from wet solids, such as drying wet clothes in a spin dryer; The special overspeed tubular separator can also separate gas mixtures of different densities; Use the characteristics of different density or grans glass of solid gran sedimentation at different rates in the liquid, other decanter centrifuges can also classify solid particles according to density or grans glass. We are a professional decanter centrifuge manufacturer.

    • Decanter Centrifuge
    • Tubular centrifuge

      Tubular centrifuges are used in liquids with a solid phase content of less than 2% and solid phase particles smaller than 2-5µ. And liquid-solid separation of suspension with small difference in liquid-solid density, and oil-water separation with small difference between light liquid and heavy liquid. The main feature of the tubular centrifuge is high speed, and the speed is generally above 10,000 rpm. Refining equipment, after separation, there is almost no solid content, and the two liquids have very little residue on each other. Manual unloading is required. Manual cleaning. Small output with a flow rate below 50L-1000L/hour.

    • Tubular centrifuge
    • Disc centrifuge

      It is mainly used for liquid-solid separation with a solid content of less than 10% and a solid phase particle diameter greater than 0.5 microns. Often used for oil-water separation: vegetable oil, animal oil, fuel oil; food: fruit juice clarification, yeast extraction, etc.; pharmaceutical industry vaccines, bacteria, glucose extraction, etc.; separation and clarification of traditional Chinese medicine plant extracts.

    • Disc centrifuge
    • Plate centrifuge

      Main feature:High load-bearing strength: The base is a flat-plate structure, which reduces the center of the machine. The machine and the shell are integrally welded, and the load-bearing strength is high.Good shock absorption performance: the machine feet are equipped with liquid damping shock absorption system, which has better shock absorption effect and can be installed without foundation.Large clamshell and small clamshell are optional, and can be equipped with feeding pipe, washing pipe, observation port, and light spray system.The equipment is directly connected to the motor, which effectively prevents the dust brought by the belt drive. Frequency conversion start: stable start, energy saving and safety.The equipment has good sealing performance and can meet the explosion-proof requirements. Suitable for flammable and explosive places.Application range:It is suitable for materials with a moisture content of more than 50%. It is suitable for both particle filtration and fiber material dehydration.

    • Plate centrifuge
  • Q
    Are you a factory or a trading company?
    We are a production-oriented enterprise specializing in the production of pharmaceutical machinery integrating R&D, production and sales, specializing in production for more than 20 years.
  • Q
    Where is your factory located?
    Our company is located in Liaoyang City, Liaoning Province, which is the earliest manufacturer of centrifuges in China. It is a pioneer enterprise in the national pharmaceutical machinery industry. You and your group are welcome to visit.
  • Q
    What materials are your products made of?
    The body of the centrifuge is made of cast iron outsourcing 304 stainless steel, and the drum, cover and other parts in contact with the material are made of 304 stainless steel. In addition, according to your material requirements, we will use 316 stainless steel, stainless steel lining Hara, etc. to manufacture.
  • Q
    How about the quality control system of your products?
    We have very strict quality control system inside. At the same time, the company and its products have passed ISO9001, SGS, CE, ISO and other certifications.
  • Q
    How about your package? Is the safety performance of the product guaranteed?
    Standard wooden box export packaging, fully guarantee the safety of the product.
  • Q
    How long is your production time?
    Usually, the production time is 30~60 days.
    Please note: during the peak season and the Spring Festival, the delivery time will be relatively extended.
  • Q
    Can you produce our specially designed products?
    Of course, we can provide customized service/OEM and ODM service with drawings for you.
  • Q
    What payment methods do you accept?
    You can pay by T/T OR LC,OR paypal ,or in cash.
  • 公司  (6)
    公司 (6)
  • 公司  (2)
    公司 (2)
  • 公司  (4)
    公司 (4)
  • 公司  (7)
    公司 (7)
  • 公司  (5)
    公司 (5)
  • 公司  (3)
    公司 (3)
Leave Us A Message

Just tell us your requirements, we can do more than you can imagine.

Chat
Now

Send your inquiry

Choose a different language
English
Afrikaans
አማርኛ
العربية
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Deutsch
Ελληνικά
Esperanto
Español
Eesti
Euskara
فارسی
Suomi
français
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
italiano
עִברִית
日本語
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
한국어
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Português
Română
русский
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
简体中文
繁體中文
Zulu
Current language:English