Professional production of centrifuge separator and pharmaceutical machinery manufacturer - Zonelink
Language
Professional production of centrifuge separator and pharmaceutical machinery manufacturer - Zonelink
The separated materials are input into the heart of the machine, which is the inside of the drum. Under the action of strong centrifugal force, the materials are separated by a set of disc bundles. With the neutral holes of the discs as the interface, heavy slag accumulates in the sediment area; specific gravity The smaller liquid moves along the disc wall into the neutral hole, gathers at the centripetal pump, and is output by the centripetal pump; the heavy slag is discharged regularly; continuous production is implemented.
Technical parameters and configuration
| DISC CENTRIFUGE | |
| Model | DHNZ550 |
| Drum inner diameter | 545mm |
| Separation factor | 10200 |
| Noise | ＜80db |
| Drum speed | About 6000rpm |
| Equivalent settlement area | 86x107cm² |
| Production capacity | 6000～10000L/h |
| Drum capacity | 30L |
| Power | 22Kw |
| Dimensions (length x width x height) | 1780x1500x1900mm |
| Weight | 2500Kg |
Separation principle
The separated materials are input into the heart of the machine, which is the inside of the drum. Under the action of strong centrifugal force, the materials are separated by a set of disc bundles. With the neutral holes of the discs as the interface, heavy slag accumulates in the sediment area; specific gravity The smaller liquid moves along the disc wall into the neutral hole, gathers at the centripetal pump, and is output by the centripetal pump; the heavy slag is discharged regularly; continuous production is implemented.
1-Inlet and outlet seat 2-Feed pipe
3-Upper machine cover 4-Drum cover
5-Disc rack 6-Disc
7-Big lock cap 8-Drum body
9-Sealing gasket 10-Slag discharge port
11-Big piston 12-Slag discharge hole
13-Water distribution tray 14-Water supply seat
15-Vertical shaft 16-Operating water pipe
17-Sealed water hole 18-Slag storage area
19-Central pump
Application
1. Beverage: Wine, tea, coffee and beer.
2. Juices: Vegetable juices, various kinds of fruit juices
3. Vegetable oil: Coconut oil, colza oil, cotton seed oil, core oil, palm oil, soybean oil, peanut oil, rice oil, sesame oil, safflower oil
4. Animal oil: Fish oil and other animal oil.
5. Mineral oil: Fuel oil, diesel oil, lubrication oil, transformer oil and waste oils.
6. Dairy Milk: Milk degrease
7. Fermented liquids: Bacterial or fungi mass after fermentation
Working principle
The separated materials enter the drum of the separator. Under the action of a strong centrifugal force field, the material passes through the separation interval of a set of disc bundles and flows from the large end of the disc along the surface to the small end of the disc. Solids with larger specific gravity move toward the big end along the disc wall and accumulate in the sediment area. The liquid with smaller specific gravity moves along the disc wall toward the small end of the disc and converges to the centripetal pump. Output by a centripetal pump, the maximum pressure shall not exceed 0.4MPa.
This machine is a ring valve automatic slag discharge type. During its working process, the separation and slag discharge cycles and other parameters (such as slag discharge time, operating water pressure, etc.) can be adjusted according to different materials. Achieve optimal separation results. Since this machine adopts computer program and PLC control, it is easy to operate, has intuitive display and has a high degree of automation.
Separator features and application range
DHN series separators have high-speed, stable, sealed and efficient fully automatic control equipment. It mainly used in two-phase separation in milk, beer, beverage and pharmaceutical industries. All parts in contact with materials are made of high-grade stainless steel. Effectively reduce corrosion on the surface of separated materials and contact parts, complying with food hygiene requirements. The separated light phase materials are output by a centripetal pump, and the maximum output pressure can reach 0.4MPa. This machine adopts the form of upper feeding and lower requirements on the inlet pressure of the material.
The power transmission adopts a hydraulic coupling and a pair of spiral speed-increasing gears. The motor starts slowly through the hydraulic coupling to drive the horizontal axis, and then through a pair of speed-increasing helical gears, the vertical shaft and drum rotate within a certain period of time (approximately 6 to 7 minutes) to reach the rated speed, which not only runs smoothly, but also provides overload protection during work.
The slag discharge action of the sliding piston is automatically controlled by computer programs and PLC. It has a high degree of automation, strong adaptability to process adjustments, and easy adjustment, which can greatly reduce the labor intensity of workers.
Accessories list
1. One separator
2. A set of rotating drums (packaged individually)
3. Accessories: a set of operating water (including slag discharge, sealing, flushing solenoid valve and operating water pressure gauge), a set of inlet and outlet pipe fittings (including inlet and outlet pipes, metal hoses and pipe pressure gauges)
4. A set of special tools
5. A set of spare parts
Drawing
Recommended
Send your inquiry
RECOMMENDED
The products cover the domestic market with its excellent quality and are exported to Europe, North America and other developed countries and developing countries in Southeast Asia, Africa, the Middle East and so on.
