Centrifuge separator
Professional production of centrifuge separator and pharmaceutical machinery manufacturer - Zonelink
Language
Professional production of centrifuge separator and pharmaceutical machinery manufacturer - Zonelink
Introduction
DBY360 disc separator is a high-speed rotating precision separation equipment. Conical disc bundles are installed in the drum, and the separated non-viscous liquid flows at high speed in such a small disc gap. In this way, laminar flow can be realized, and two kinds of materials (liquid-solid) with different specific gravity can achieve good separation effect.
Equipment material
1. The drum body, drum cover and large piston are made of 118 high-strength stainless steel. The locking ring is made of high-strength chrome-nickel stainless steel.
2. The disc, inlet and outlet and cover are all made of 304 material.
3. The base is made of high-strength cast iron, and the surface of the fuselage is treated with high-temperature baking paint.
4. The material of the sealing ring in contact with the material is silicone rubber.
Electrical control
1. The separator is controlled by PLC program with touch screen display. It also has a safe operation alarm system (If the operating parameters exceed the safety data range of the equipment, an alarm will be issued).
2. The system has three operating water valves, and the sealing, slag discharge and flushing actions are performed through the corresponding solenoid valves.
3. The device is equipped with a vibration sensor. When the vibration of the equipment is higher than the first-level set value, the system will send out an alarm. When the vibration is higher than the secondary set value, the system will automatically stop.
4. The system is equipped with a current transmitter on the circuit of the motor to detect the current of the motor in real time. When the motor current is higher than the rated current of the motor and lasts for 2 minutes, the system will send out an alarm.
5. The equipment is equipped with a slag discharge current alarm. When the amount of slag discharge does not meet the set requirements, the machine will automatically alarm.
Skills requirement
1. The power supply is 380V, 50HZ, three-phase five-wire system.
2. Operating water requirements:
(1) Demineralized water, solid content less than 0.001% (V/V)
Maximum particle diameter: 50um.
(2) Pressure 0.3-0.4Mpa.
(3) Chloride ion content is less than 100ppm
(4) The hardness of water is less than 180mgCaCo3/L.
Accessories Details
Serial | Name | Model | QTY |
1 | Separator host | DBY360 | 1 |
2 | Electric control cabinet | ZONELINK | 1 |
3 | PLC | Siemens-S7-200 SMART |
|
4 | Motor | Anhui Wannan | 1 |
5 | Touch screen | Schneider, | 1 |
6 | Other low-voltage electrical components | Schneider | 1 |
7 | Spare parts and wearing parts |
| 1 |
8 | Installation tool |
| 1 |
9 | operating water (including slag discharge, sealing, flushing solenoid valve and operating water pressure gauge |
| 1 |
10 | Inlet and outlet pipe fittings (including inlet and outlet pipes, metal hoses and pipeline pressure gauges) |
| 1 |
Drawing
Equipment support and after-sales service
(1) The warranty period of the product shall be 12 months from the date of final acceptance of the equipment, and the product acceptance shall be conducted within one month after the equipment arrives at the customer's site;
(2) Training: In the process of design, manufacturing, installation, debugging and after-sales service, Party A's technical personnel and operators shall be trained on site until they are proficient, so that Party A's personnel can independently and normally use and maintain the equipment after Party B's personnel leave.
(3) During the warranty period, if there is any quality problem of the equipment, Party B shall reply within 24 hours and arrive within 48 hours to solve the problem, and all costs shall be borne by Party B. In case of failure caused by Party A's improper use, Party B shall charge the corresponding cost.
(4) Party B will provide quality tracking services irregularly after the completion of installation and debugging.
(5) After the warranty period, we will continue to provide free telephone technical support, and charge relevant fees for on-site service according to the actual situation.
Recommended
Send your inquiry
RECOMMENDED
The products cover the domestic market with its excellent quality and are exported to Europe, North America and other developed countries and developing countries in Southeast Asia, Africa, the Middle East and so on.
