Centrifuge separator
Professional production of centrifuge separator and pharmaceutical machinery manufacturer - Zonelink
Language
Professional production of centrifuge separator and pharmaceutical machinery manufacturer - Zonelink
Introduction
The centrifuge equipment is implemented in accordance with the JB/T10769.1-JB/T10769.2-2007 manufacturing standard, and the airtightness, explosion-proof, balance accuracy, and safety performance comply with the relevant regulations of GB19815-2005.
Brief Introduction
The series of products designed for laboratory two phase separation, it is mainly used for small batch from 1L/H - 500 L/H continuous processing operations, the minimum throughput is far less than the required throughput, industrial centrifuges for the study of scientific research units and small batch production of the best separation equipment: in the past, this processing phase process usually choose partial simulation methods.
Application
LW series of high performance small horizontal screw centrifuges are usually used in the food fermentation industry, fine chemical, pharmaceutical and biotechnology industries. The centrifuges should also be used to produce high quality products with flow rate less than 200L/H.LW series can also be used as measuring instruments to record the two-phase flow characteristics of the test products and the torque changes and power consumption of the screw, and to modify the process from the flow behavior of the products.
Separator features and application range
The working principle of horizontal screw centrifuge is very simple. It has been known by the public for a century. The drum and screw are supported by separate suspension.The material enters through the inlet pipe and accelerates into the core drum body through the drum.
Separation process
The core consists of a cylindrical and conical rotating drum, and the centrifuge forces the solid material to deposit on the drum wall.
Solid discharge
The helix has the same shape and Angle as the drum, rotating at a slightly faster speed than the drum, so that the separated solids are pushed towards the end of the narrow cone and expelled from the drum.The degree of dehydration of solids depends on many factors, in addition to the reason of the material itself, but also depends on the length of the separation of solids in the centrifuge, as well as the Angle of the tight rotation of solids, in addition to the screw and drum speed difference is also an important factor.
Drainage
A chuck is installed at the bottom of the drum to adjust the depth of liquid level. The clarified liquid flows to the bottom along the spiral cylinder, and then is collected in the drain bucket to discharge the machine. The depth of the clarified liquid in the drum can be adjusted by changing different baffles.
Technical parameters and configuration
Model | LW-80 | LW-120 |
Drum diameter mm | 80 | 120 |
Half cone Angle | 5° | 6° |
Feed tube diameter mm | 12 | 18 |
Speed rpm | 8000 | 6500 |
Capacity L/H | 5-100 | 50-500 |
Length to diameter ratio | 3.75 | 3.85 |
Motor power kw | 4 | 7.5 |
Maximum separation factor | 3000 | 2800 |
Weight kg | 250 | 700 |
Overall dimensions mm | 850*650*1100 | 1150*750*1100 |
Drawing
Raw material density: 5um~5mm
Solid content: 0.5%~40%
Recommended
Send your inquiry
RECOMMENDED
The products cover the domestic market with its excellent quality and are exported to Europe, North America and other developed countries and developing countries in Southeast Asia, Africa, the Middle East and so on.
